「usb」の検索結果

Разработка прошивок для BE-U1000 (Baikal Electronics / Байкал Электроникс, три ядра RISC-V: BR-350 и BM-310) на отладочных платах EVU-BA-2.1, EVU-BA-2.0 и EVU-BA-1.2 — её eFlash и QSPI flash, UART0/BootROM CLI, PWMA (захват и импульсы), АЦП с DMA, CAN FD, SPI, WDT, CLIC, а также SDK Байкала и его система сборки на make. Use when working on this board or any BE-U1000 / BMCU_U project (SDK 2.1/2.3, riscv32-none-elf, dfu-util, OpenOCD): настройка проекта, Makefile и MEM_REG_ROM, карта выводов и разъёмы XP1/XP8/XP9/XP10, режимы начальной загрузки и страповые выводы, прошивка по UART XMODEM либо USB DFU, работа с eFlash и TCM, прерывания и CLIC, отладка по JTAG — и разбор, почему плата молчит, не стартует, зависает или почему периферия «настроилась», а обмена нет.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 30-pin ESP32-WROOM-32 development board — the DOIT ESP32 DevKit V1 / ESP32 CH340 Type-C / NodeMCU-ESP32 30-pin form factor, 15 pins per side, CH340G or CP2102 USB-UART bridge, AMS1117 LDO, user LED on GPIO2. Use when working on a 30-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module): project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, I2C, deep sleep and RTC wake pins, flashing over the CH340 bridge, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 36-pin ESP32-WROOM-32 development board — the original DOIT ESP32 DevKit V1 with 18 pins per side, i.e. the 30-pin layout plus the six in-package flash pins (SD0 SD1 SD2 SD3 CMD CLK = GPIO6-11) broken out at the USB end, CH340G or CP2102 bridge, AMS1117 LDO, user LED on GPIO2, GPIO0 not on the header. Use when working on a 36-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module), or when identifying which ESP32 board size you have: project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, the flash-pin trap, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, deep sleep and RTC wake pins, flashing, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Add a macOS menu bar status indicator for NanoClaw. Shows a bolt icon with a green/red dot indicating whether NanoClaw is running, with Start, Stop, and Restart controls. macOS only.

日本語の概要は準備中です。原文の説明を表示しています。

Use when orchestrating Loop Factory specs from factory/specs/inbox or factory/specs/active, dispatching work, generating implementation prompts, or deciding next loop state.

日本語の概要は準備中です。原文の説明を表示しています。

Use when orchestrating Loop Factory specs from factory/specs/inbox or factory/specs/active, dispatching work to Codex or Claude agents, generating implementation prompts, or deciding next loop state.

日本語の概要は準備中です。原文の説明を表示しています。

Use when code changes should be scanned and reflected back into living specs, docs, or architecture notes without changing product intent.

日本語の概要は準備中です。原文の説明を表示しています。

Use when reviewing active Loop Factory specs against the working tree, checking verification evidence, deciding ACCEPTED or CHANGES_REQUESTED, and archiving accepted specs.

日本語の概要は準備中です。原文の説明を表示しています。

Drive QA of a SwiftUI app on a real iPhone over USB - screenshot, read the accessibility tree, inspect @Observable state, tap, swipe, and type through an HTTP bridge embedded in the app under test. Use when asked to test an iOS app on a physical device, find bugs on the device, or expose a connected iPhone to a remote agent over Tailscale. Requires the ios-agent-qa runtime; not for simulator or XCTest work.

日本語の概要は準備中です。原文の説明を表示しています。

Add a macOS menu bar status indicator for NanoClaw. Shows a bolt icon with a green/red dot indicating whether NanoClaw is running, with Start, Stop, and Restart controls. macOS only.

日本語の概要は準備中です。原文の説明を表示しています。

Add a macOS menu bar status indicator for NanoClaw. Shows a bolt icon with a green/red dot indicating whether NanoClaw is running, with Start, Stop, and Restart controls. macOS only.

日本語の概要は準備中です。原文の説明を表示しています。

This skill covers detecting sophisticated cyber-physical attacks that follow the Stuxnet attack pattern of modifying PLC logic while spoofing sensor readings to hide the manipulation from operators. It addresses PLC logic integrity monitoring, physics-based process anomaly detection, engineering workstation compromise indicators, USB-borne attack vectors, and multi-stage attack chain detection spanning IT-to-OT lateral movement through to process manipulation.

日本語の概要は準備中です。原文の説明を表示しています。

- Check and interpret data-breach exposure for an email, username, phone or name using Have I Been Pwned, the Pwned Passwords k-anonymity range API, DeHashed, IntelX and Snusbase. Use when checking breach or leak exposure, finding which services an account was registered with, interpreting a combolist or credential dump, assessing credential compromise, or auditing your own leaked personal data

日本語の概要は準備中です。原文の説明を表示しています。

This skill covers detecting sophisticated cyber-physical attacks that follow the Stuxnet attack pattern of modifying PLC logic while spoofing sensor readings to hide the manipulation from operators. It addresses PLC logic integrity monitoring, physics-based process anomaly detection, engineering workstation compromise indicators, USB-borne attack vectors, and multi-stage attack chain detection spanning IT-to-OT lateral movement through to process manipulation.

日本語の概要は準備中です。原文の説明を表示しています。

This skill covers detecting sophisticated cyber-physical attacks that follow the Stuxnet attack pattern of modifying PLC logic while spoofing sensor readings to hide the manipulation from operators. It addresses PLC logic integrity monitoring, physics-based process anomaly detection, engineering workstation compromise indicators, USB-borne attack vectors, and multi-stage attack chain detection spanning IT-to-OT lateral movement through to process manipulation.

日本語の概要は準備中です。原文の説明を表示しています。

Add a macOS menu bar status indicator for NanoClaw. Shows a bolt icon with a green/red dot indicating whether NanoClaw is running, with Start, Stop, and Restart controls. macOS only.

日本語の概要は準備中です。原文の説明を表示しています。